Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

东海黑潮水与陆架水的季节性输运和交换

在流星分析和ｔ－Ｓ点聚分析的基础上，在台湾东北部ＩＳ断面和东海中部ＰＮ断面上选取适当的纵剖面作为分界面，将以面分成东、西两侧，计算了界面两侧的海水交换星。结果表明：１．东海陆架区海水交换可归纳为两种类型，即“穿插型”和“进退型”。２．参与分界面处海水交换总量的年平均是夏季最大，春、秋季次之，冬季最小。黑潮水向陆架区输运量为０．５８×１０６ｍ３／ｓ，陆架水向黑潮刚输运量为０．８４×１０６ｍ３／ｓ；参与交换的总量为１．４２×１０６ｍ３／ｓ．３．相对输运量计算结果表明；黑潮水对陆架区水文状况的影响是冬季最强，秋、春季次之，夏季最弱，而陆架水对黑潮区水文状况的影响是夏季最大，秋季次之，春季和冬季最小。     

结构海床耦合系统动力分析数值模型及考察

基于改进的哈丁模型建立了结构海床耦合系统的等效线性化动力分析模型。等效阻尼比是对土体进行等效线性化分析的重要组成,论文着重对土体阻尼对结构海床耦合系统的影响效应进行了考察。接触面分离力是运用滑动库仑摩擦模型进行接触面效应模拟的重要参数,在以前的工作基础上,文中提出了新的结构-海床接触面分离力模型并进行了考察,使其更符合实际情况     

海水中液-固界面的台阶型动力学曲线 Ⅰ.动力学曲线之台阶的消长和变化规律

对海水中Zn(Ⅱ),Ca(Ⅱ),Cd(Ⅱ)与高岭石、伊利石和蒙脱石等粘土矿物;无定形水合氧化铁、α-FeOOH等铁的水合氧化物;δ-MaO_2,γ-MnOOH,水锰矿等锰的水合氧化物等30个左右实验体系的液-固界面台阶型动力学曲线进行了系统的实验测定和全面的条件研究。在实验测定上提出两种方法、互为校核。对动力学曲线之台阶的消长和变化规律作了系统研究,确定主要影响因素是:金属离子初始浓度、固体交换剂量、体系的pH值和温度,以及搅拌速度等。     

海水中液-固界面的台阶型动力学曲线 Ⅱ.液膜扩散-递进扩散-界面分级交换反应联合控制的复合模型理论

为定量解释海水中液-固界面的台阶型动力学曲线及其台阶的消长变化规律,在我们已提出的“液膜扩散和递进液膜扩散控制的复合模型”和“海水中液-固界面分级离子/配位子交换理论”基础上,吸取Crank的若干数学处理方法,进而提出适合于非稳态体系的“液膜扩散-递进扩散-界面分级交换反应联合控制的复合模型”。     

1∶500,1∶1000,1∶2000系列数字化测绘产品的精度目标与实现

1∶500,1∶1000,1∶2000系列数字化测绘产品按其生产工艺和用途的不同其精度规格也不尽相同,但产品的精度状况始终是测绘生产部门与用户所关心的问题。本文列举了现行有关规范的相关精度指标、规格,并结合产品的用途、特点和测绘生产的实际,简要阐述精度目标的控制与实现过程,对测绘实际工作有一定的参考价值。     

基于VB的地质矿产数据库管理系统中数据I／0功能的实现

随着计算机技术在地质矿业部门的应用，建立地质矿产数据库，开发相应的数据库管理信息系统已成为必然。结合VB下地质矿产数据库管理系统开发的实践，针对地质矿产数据种类繁多的特点，对系统中数据输入与输出(I／0)的通用界面设计与功能实现方法进行了探讨，给出了相应的运行界面和编程思路。     

Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.     

地理世情监测标准建设初探

探讨地理世情监测标准规范建设的需求与意义,归纳梳理国内外相关标准规范建设的现状,分析目前我国地理世情监测标准规范建设存在的不足,提出相关建议,以推动地理世情监测工作的开展。     

Modeling discontinuous rock mass based on smoothed finite element method

This paper aims at developing a method for modeling rock mass with preexisting multiple discontinuities within the framework of the smoothed finite element method (SFEM). The discontinuity is simulated by an interface element with zero thickness, the stiffness matrix of which are derived explicitly based on the SFEM. An elastic damage constitutive relation with residual strength is introduced in order to describe the nonlinear mechanical behavior of the discontinuities. The computation codes of the present method were developed. The present method has been verified to be a sound approach for modeling discontinuous rock mass, inheriting the advantages of the SFEM.